F828 (CEM-1)

F828 (CEM-1)

F828, similar to CEM-1, is made with continuous-filament woven glass fabric outer surfaces and cellulosic paper core, using a flame-retardant epoxy resin binder.It exhibits high mechanical strengths (flexural, impact, and tensile) at room temperature. It has good dielectric loss and electric strength properties under both dry and humid conditions and does not support combustion under specific laboratory test conditions,punches well up to 2mm.
Send Inquiry

Product Standard

 

ISO, NEMA, IEC, DIN, JIS

 

Material: woven fiberglass cloth, epoxy resin, cellulosic paper core

Color & Logo: white

 

F828, similar to CEM-1, is made with continuous-filament woven glass fabric outer surfaces and cellulosic paper core, using a flame-retardant epoxy resin binder.It exhibits high mechanical strengths (flexural, impact, and tensile) at room temperature. It has good dielectric loss and electric strength properties under both dry and humid conditions and does not support combustion under specific laboratory test conditions,punches well up to 2mm. It is used for electrical and electronic insulation where low moisture absorption and moderate physical and electrical strength is needed. It meets flammability class V-0, when tested in accordance with UL 94 and is not recommended for wear applications.

Product Application

 

Industry

Components

Benefits

Appliances

Rice cooker terminal boards, AC relay brackets

Resists humidity-induced deformation

Industrial

Inverter insulation plates, motor commutator shims

Arc-resistant, extends lifespan

New Energy

PV inverter connectors, EV charger insulation sleeves

Flame-retardant, withstands harsh conditions

Product Properties

 

  • Flame Retardancy: UL 94 V0 rating (self-extinguishing within ≤10 seconds, no dripping).
  • Machinability: Clean punching edges without burrs (recommended speed: 150-300 strokes/min).
  • Heat Resistance: Continuous service temperature up to 130°C .

FAQ

 

FAQ

Q: What are the differences between F828 (CM-1) and FR-4?

A: FR-4 uses full glass-epoxy for higher strength but at higher cost. F828 (CEM-1) reduces cost via cellulose core while maintaining V0 flame retardancy, ideal for high-volume stamped parts.

Q: How to avoid moisture absorption during storage?

A: Store in sealed packaging (≤40% RH). Use within 48 hours after opening or keep in 30°C/dry cabinets.

 

 

 

Hot Tags: f828 (cem-1), China f828 (cem-1) manufacturers, suppliers, factory, pet laminate sheets, flexible laminate sheets, precision fiber laminate, reinforced laminate sheets, high quality laminate sheets, polyester laminate sheets