Product Standard
NEMA, IEC, DIN
product Specification
|
UPGM203 GPO-3 (F622CP PUNCH) Polyester Glass Mat Products |
||
|
Dimensions (LxW) |
1000*1200 |
MM |
|
1010*2010 |
MM |
|
|
1250*2500 |
MM |
|
|
Density |
1.70-1.90 |
g/cm3 |
|
Electric strength perpendicular to laminations (in |
≥10.5 |
kV/mm |
|
Breakdown voltage parallel to laminations |
≥35 |
kV |
|
Insulation resistance after 24 h water immersion, D-24/23 |
≥5.0×102 |
MΩ |
|
Water absorption rate, 4 mm in thickness |
≤63 |
mg |
|
Tracking and erosion resistance |
1B 2.5 |
CLASS |
|
Comparative tracking index (CTI) |
≥500 |
V |
|
Flammability (1 mm in thickness) |
V-0 |
CLASS |
Material: unsaturated polyester, glass fiber
Approved by: SGS
Color & Logo: White, red, grey, brown, dark-red
F622CP, similar to F622 GPO-3, is made of non-alkali glass fiber felt board immersed in unsaturated polyester resin paste, and add the corresponding additives by hot pressing hard plate insulation material, but with punching performance.
Product Advantages
For use in the transit industry, where smoke generation and smoke toxicity are of primary concern. It is also recommended for switchgear, connectors, and control panels.
Product Applications
Application in circuit breakers:
Frame-type circuit breaker: safety baffle, safety shield, spacer liner, interphase partition, etc.
Applications in molded case circuit breakers: interphase partition plates, arc extinguishing chamber arc isolation plates, etc.
Application in electric motors:
Motor armature components, movable cover plates, slot wedge stators, fixed gaskets, thin gaskets, carbon brush seats, etc
Application in switchgear: front end, rear end, top end, bottom end, interphase partition, etc. in the partition system
Other applications:
Arc-resistant structural components
Hot Tags: UPGM203 GPO-3 (F622CP PUNCH) Polyester Glass Mat Products, China UPGM203 GPO-3 (F622CP PUNCH) Polyester Glass Mat Products manufacturers, suppliers, factory, polyester molded pieces, Sheet molding compound product, polyester molded assemblies, GPO 3 UL, Pultruded Profiles polyester, polyester molded parts
